THK BNK 1404-3RRG0+230LC3Y
Number of loaded circuits | DN Value | Preload | Method for Providing a Preload | Type of guide |
3 row × 1.00 turns | 70000 | Yes | Over ball | Ball |
Shaft process method | Ball cage | Splined portion | Hollow shaft | Recommended support unit on the Fixed Side type |
Precision | None | None | None | EK12, FK12 |
Recommended support unit on the Supported Side type | Types of Nuts | Threading direction | Spacer ball | Rigidity in the axial direction (N/μm) |
EF12, FF12 | Single nut | Right-hand | None | 190.0 |
Number of threaded grooves | Dust prevention measure | Dust cover type | Wiper ring is available | QZ Lubricator is available |
1 | RR | Bellows | None | None |
With/without oil hole | Nipple, plumbing fixture type | Material Specifications | Type using standard material | Standard grease |
None | None | Iron-based, stainless steel | Iron-based | AFB-LF |
Standard lubrication method | Standard seal | Whether it is possible to change to a high temperature type | Nut surface treatment | Shaft surface treatment |
Grease Lubrication | RR | Cannot be supported | AP-CF, AP-C, AP-HC, other | AP-CF, AP-C, AP-HC, other |
Minimum service temperature Centigrade (°C) | Minimum service temperature Fahrenheit (°F) | Minimum service temperature(Centigrade°C) | Minimum service temperature(Fahrenheit°F) | Finished product of the shaft end (with/without) |
-15 | 5 | 80 | 176 | Yes |
2D-CAD data | bnk1404_3rrg0_230lc3y.dxf | Dimensional drawing/ Detail dimensional table | 500-1E1_16-B634.pdf |