THK BNT 1808-3.6 THK滚珠丝杠_THK滚珠丝杠THK BNT 1808-3.6价格,图片,THK资料-上海斯将利
当前位置: 主页 > THK型号 > THK BNT 1808-3.6 >

【THK BNT 1808-3.6 THK滚珠丝杠】

产品/服务: THK滚珠丝杠 
单 价: 面议   询价
品牌: THK
最后更新: 2009-06-01
公司基本资料信息
 
 
产品详细说明

THK BNT 1808-3.6

    THK BNT 1808-3.6 THK滚珠丝杠
    Number of loaded circuitsDN ValuePreloadMethod for Providing a PreloadType of guide
    1row × 3.65 turns70000NoneNoneBall

    Shaft process methodBall cageSplined portionHollow shaftRecommended support unit on the Fixed Side type
    PrecisionNoneNoneNoneBK12,EK12,FK12

    Recommended support unit on the Supported Side typeTypes of NutsThreading directionSpacer ballRigidity in the axial direction (N/μm)
    BF12, EF12, FF12Single nutRight-hand, left-hand(must be checked), left-and-right-hand(must be checked)None270.0

    Number of threaded groovesDust prevention measureDust cover typeWiper ring is availableQZ Lubricator is available
    1RRBellowsNoneNone

    With/without oil holeNipple, plumbing fixture typeMaterial SpecificationsType using standard materialStandard grease
    YesA-MT6 * 1, B-MT6 * 1, C-MT6 * 1, LF-E, SF-EIron-basedIron-basedAFB-LF

    Standard lubrication methodStandard sealWhether it is possible to change to a high temperature typeNut surface treatmentShaft surface treatment
    Grease LubricationRRCan be supportedAP-CF, AP-C, AP-HC, otherAP-CF, AP-C, AP-HC, other

    Minimum service temperature Centigrade (°C)Minimum service temperature Fahrenheit (°F)Minimum service temperature(Centigrade°C)Minimum service temperature(Fahrenheit°F)Finished product of the shaft end (with/without)
    -15580176None

    2D-CAD data bnt1808_36.dxf Dimensional drawing/
    Detail dimensional table
    500-1E1_16-B716.pdf

 

[ 打印本文 ]  [ 关闭窗口 ]  [ 返回顶部 ]